>

PERFORMANCE FORUM
CLICK HERE

 
GP1200R
GP800R

ALSO SEE OUR WATERCRAFT PAGE FOR ADDITIONAL PARTS

  
 
 
GP1200R RIDEPLATE MODS
UP TO 5+ MPH

For those looking to gain the MOST out of their setup, you can have your R&D or RIVA rideplate modified for even more top speed and performance. Additional speeds up to 3 MPH over an unmachined R&D or RIVA rideplate and up to 5+mph over the stock OEM rideplate can be achieved with these modifications.
Most aftermarket plates are poorly cast and many are even warped in stock form. Machining the plate assures a truly flat riding surface without performance robbing imperfections. Make no mistake! These are the WORLDS FASTEST Rideplates available anywhere.You can send in your rideplate for modification or purchace a new one from us already modified. ( Prices shown are for machine work only )
WE ARE THE ORIGINATORS OF THE MODIFIED RIDEPLATES FOR THE GPR.
ACCEPT NO IMITATIONS


MOD 1 $125.00
Center Riding Surface Machining
( R&D Rideplate - With or Without Skegs )
( RIVA Rideplate - Without Skegs Only )

MOD 2 $125.00
Mounting Surface Machining ( Fully Tunable Angle Mod )

MOD 3 $195.00
Center Riding Surface Machining
Mounting Surface Machining ( Fully Tunable Angle Mod )
( R&D Rideplate - With or Without Skegs )
( RIVA Rideplate - Without Skegs Only )


MOD 4 $250.00
Center Riding Surface Machining ( With or Without Skegs )
Mounting Surface Machining ( Fully Tunable Angle Mod )
Side Riding Surface Machining
( R&D Rideplate Only )

***NOTE***
ISLAND RACING'S MODIFIED RIDEPLATES ARE THE WORLDS FASTEST RIDEPLATES AVAILABLE!
RIDER TESTED AND PROVEN!
( CALL FOR RECOMENDATIONS ON WHICH MOD IS BEST SUITED FOR YOUR RIDING CONDIDIONS )

  
 
 
PERFORMANCE KITS

 
ISLAND RACING LEVEL 1 GP1200R
IR-L1-GP1200R $629.95
 
R&D Rideplate
R&D Aquavein Intake Grate
Solas Concord Impeller YF-CD 13/19
R&D Pump Seal Kit

OPTIONS
3M 4200 Fast Cure Sealant $26.95
R&D Performance Trim Tabs +$225.95
Worx Sponsons +$292.95

ISLAND RACING LEVEL 1 GP800R
IR-L1-GP800R $629.95
 
R&D Rideplate
R&D Aquavein Intake Grate
Solas Concord Impeller YF-CD 11/14
R&D Pump Seal Kit

OPTIONS
3M 4200 Fast Cure Sealant +$26.95
R&D Performance Trim Tabs +$225.95
Worx Sponsons +$292.95

  
 
 
PARTS & ACCESSORIES

 
3M MARINE ADHESIVE SEALANT 4200 FAST CURE
06560 $26.95
White 10 Ounce
06564 $26.95 Black 10 Ounce

We all know "pump sealing" is a must on virtually all Yamaha models. 3M 4200 FAST CURE is by far the most commonly used sealant by ALL watercraft owners and IS the recommended sealant to use for your Yamaha pump sealing needs.

ADVENT CDI
$629.95

The Tempest 3 (T3) Ignition from Advent Products is the leading edge in ignition technology. The T3 Ignition was designed to include all the features and capability you could ever wish for in a performance ignition. If the ignition doesn't do its job, nothing else under the sun matters. The T3 GPR Ignition is the most complete and reliable solution to engine control. The T3 GPR Ignition brings together a high output energy ignition, multiple performance advance curves, rev limiter and water control in a single product. With the Advent T3 Ignition on your team, you can pull ahead of the competition.

ATLANTIS DOCK LINE
A1941 $17.95 Black
A1944 $17.95 Blue
A1938 $17.95 Red
A1936 $17.95 Yellow
 
Made of solid braid, multi-filament polypropylene. It's 12' lightweight line features a standard loop at one end providing a quick and easy way to secure your personal watercraft or boat. Multiple uses: Towing, docking, launching, beaching, and anchoring. Benefits: stays soft, easy to handle, floats, no metal clips to scratch the watercraft, retains color no bleeding! Resists saltwater, UV rays, fuel/oil and mildew, will not dry rot.

ATLANTIS DUCKBILL DRAIN KITS
A8025 $39.95

Now you can add a simple drain system to keep your bilge empty as you drive! Our complete kit comes with all the hardware for the easy installation. Just unscrew your drain plug and screw our duckbill drain plugs in place. Keep your old one if you ever need to change! ( Two Required )

ATLANTIS FLOATING WRIST LANYARD
A8139 $17.95 Blue/Black
A8147 $17.95 Black/Black
A8158 $17.95 Red/Black
  • Clip apart so they can be used as wrist or vest lanyard
  • Made of polyurethane cord that floats
  • Come with one-hand easy-glide slider
  • Available in a variety of colors

ATLANTIS FLUSH KIT
A8582B $19.95

ATLANTIS PRO FLOATING WRIST LANYARD
A8130 $23.95 Black

ATLANTIS QUICK TIE DOWN PIN
A8112 $13.95
 
Our Tie Down Pin is designed for front or rear bow eyes. Now a way to tie down your PWC, tow a water toy or skier, another boat, even to help winching in the PWC or attach a docking line.

BALLISTIC EVO2 PERFORMANCE LIGHTWEIGHT LITHIUM BATTERY
100-014 $299.95 16cell HD EVO2
  • Dimensions (Metric): 122mm (L) x 86mm (W) x 148mm (H)
  • Dimensions (Standard): 4.8" (L) x 3.4" (W) x 5.8" (H)
  • Negative Terminal Location: Left
  • Weight: 1621 grams (3.51 lbs.)
  • Voltage (Charged): 13.6V
  • Amperage: 9.2Amp/Hour
  • Lead Acid Equivalent Amperage: 28 Pb-eq/Ah
  • Burst Cranking Amps: 500amps
  • Up to 80% smaller than the stock battery
  • Up to 10lbs Lighter than the stock battery
  • Service life of over twice a lead acid in similar conditions
  • Industry leading 3 year warranty
  • Designed, developed, and assembled in the USA
  • Completely dry technology so batteries can be mounted in any direction
  • Non-toxic, recyclable, and can be air shipped
  • Applications for powersports vehicles from 50cc - 2300cc
  • Tested extensively by professional race teams
  • Impact and water resistant
  • Works with the original equipment charging system
  • No trickle charger required, loses only 10% of charge over a year of static use

BEL-RAY MARINE SILICONE LUBRICANT
99707 $7.95
  • Non-toxic high-viscosity silicone fluid
  • Pearlescent in color, smooth tacky and waterproof
  • Fights corrosion and lubricates wood, nylon, rubber, metals, canvas and leather
  • Eliminates squeaking and binding
  • 400ml aerosol can

BEL-RAY MARINE WATERPROOF GREASE
99710 $9.95
 
Marine Waterproof Grease is a mineral oil based, aluminum complex grease. Because it is an aluminum complex grease, Marine Waterproof Grease exhibits all of the beneficial properties of that thickener, including being virtually waterproof. It is a severe duty grease providing maximum protection against wear, rust, corrosion and water washout. Marine Waterproof Grease is formulated to provide for wet-duty performance including the wheel bearings of boat trailers in fresh or salt water. Marine Waterproof Grease repels water and is an excellent seal for bushings, bearings, all chassis lubrication points.

BLOWSION VACATE VALVE
06-01-063 $31.95
 
A simple installation drain valve alternative for the OEM drain plugs in Yamaha model watercraft.

   
COVERCRAFT ULTRATECT COVER
4004-0212 $215.95
  • Ultra'tect® is a high-performance fabric that provides great protection against UV rays, is very breathable and fade-resistant
  • All seams are overlapped and double-stitched for superior strength
  • Strong, bar-tacked tie-down loops secure the cover on watercraft for trailering (rope not included)
  • Underside of cover has heavy-duty double-layer reinforcement panels in high-abrasion areas
  • Reinforced opening for trailer pins and security straps
  • Adjustable, heavy-duty shock cord sewn around the entire hem
  • Reflexite® safety reflector strips sewn on the back to give additional warning when the watercraft is moored or on a trailer (meets Federal and USCG specs)
  • Non-scratch, corrosion-free access zipper behind handlebar for vest and wetsuit storage; sewn-in quick-dry mesh bag with hook-and-loop closure to store gloves, goggles and other small items
  • Zippered gas cap access panel allows fueling while the watercraft is on a trailer
  • Easy to clean

CRC SALT TERMINATOR
SX32M $29.99
32 Oz. with Mixer 
SX32 $17.99  32 Oz.
SX128 $39.99 1 Gal.

Cleans & protects anything exposed to salt (saltwater, salt air, road salt). Dissolves salt & leaves a protective coating to inhibit corrosion. Essential as a motor flush for marine engines in both saltwater and freshwater environments.

DSS COUPLER REMOVAL TOOL
TOOL61-5 $36.95

A must have tool for removing the driveshaft coupler on the GP1200R.

DSS DRIVESHAFT HOLDER TOOL
TOOL56 $21.95

A must have tool when removing the impeller on the GP1200R.

HOT RODS CRANKSHAFT
4069 $899.95 GP1200R

Hot Rods Crankshafts are sold complete with the original proven Hot Rods Connecting Rods, top end bearings, and crankshaft webs.
Factory assembled and trued to OEM specifications, Hot Rods Cranks will meet or surpass the OEM in performance and durability.
Crankshafts are completely rebuildable with genuine Hot Rods connecting rods.
ALL BRAND NEW! Not Rebuilt

HOT RODS CRANKSHAFT
4072 $629.95 GP800R

Hot Rods Crankshafts are sold complete with the original proven Hot Rods Connecting Rods, top end bearings, and crankshaft webs.
Factory assembled and trued to OEM specifications, Hot Rods Cranks will meet or surpass the OEM in performance and durability.
Crankshafts are completely rebuildable with genuine Hot Rods connecting rods.
ALL BRAND NEW! Not Rebuilt

HYDRO-TURF MATS
HT791
$79.95


HYDRO-TURF SEAT COVER
SEW791 $130.00

HYDRO-TURF SPLASH GUARD
TS03
$49.95

ISLAND RACING
BORED SHO STEERING NOZZLE
$99.95

Increase safety and reliability by replacing the OEM Yamaha GPR plastic steering nozzle with the OEM Yamaha SHO aluminum steering nozzle bored for use on the GPR. Installs in minutes! No speed loss associated with bolting on an unbored SHO nozzle.

ISLAND RACING
CARB JET KIT
IR-CJK-66V $119.95
GP1200R
IR-CJK-66E $84.95 GP800R

Our JET KITS contain everything you need to successfully rejet your carburetors to ISLAND specs or yours. Take the guesswork out of carb tuning. Every kit is custom assembled for your level of modification and other factors such as location, altitude, climate, etc. which all has an effect on jetting specs.
  • Needles / Seats
  • High Jets
  • Low Jets
  • Springs
  • Acc. Pump B/O Kit

ISLAND RACING
CARB MOD

( CALL FOR PRICING )

Send ISLAND RACING your carburetors and let us professionaly do the work for you. Many feel unsure about performing their own carburetor work. We take your carbs, perform the following work, and return them ready to bolt on.

  • Rejet Carburetors ( IR Pro Carb Jet Kit Extra )
  • Adjust Pop-off pressure 
  • Remove Choke Plates
  • Install Primer Fittings ( Primer Kit Extra )
  • Remove Accelerator Pump
  • Install Acc. Pump B/O Kit ( Included In IR Pro Carb Jet Kit ) 
  • Remove Tamper Caps
  • Install High T-Handle Adjusters ( T-Handles Extra )
  • Install Low Speed T-Handle Adjusters ( T-Handles Extra ) 
  • Resyncronize Carburetor Rack

ISLAND RACING
CARB SOCKET BOLT KIT
IR-CSBK-66V $19.95 Stock w/ Acc. Pump
IR-CSBK-66V-CJK $19.95 For IR Carb Jet Kit

   

ISLAND RACING
FUEL / VAPOR SEPERATOR KITS
$179.95 SINGLE PUMP SYSTEMS
$239.95 DUAL PUMP SYSTEMS

"SUCK FUEL NOT AIR"
A MUST FOR ALL RACING APPLICATIONS
ISLAND RACING'S FUEL / VAPOR SEPERATOR KITS are the finest available on the market! There are other "one kit for all applications" seperators on the market that contain inferior plastic fittings, cheap hardware store vinyl tubing, and thin walled chambers. Our kits contain all brass fittings, highest quality industry standard urethane fuel line, and a rugged polished aluminum chamber design.
CUSTOM CHAMBER CONFIGURATIONS AVAILABLE
Due to the many combinations available, please call so the FUEL / VAPOR SEPERAOR can be set up for your individual application.
( SEE SAMPLE KITS ON RIGHT )


ISLAND RACING
HEAVY DUTY FRONT PUMP BEARING
IR-HDFPB-6205 $34.95

Our HEAVY DUTY FRONT PUMP BEARING is a direct replacement for the weaker OEM bearing. The heavy duty / long life bearing is rated at 10X Longer life in contaminated oil, 6X Longer life in clean oil, 8X more dent resistant, and 1.5 X the wear resistance of the OEM front bearing.

ISLAND RACING
HEAVY DUTY BRACKET KIT GPR INTAKE GRATE
IR-HDBK-GPR-IG $44.95

This kit is designed to completely replace the factory installed brass inserts inside the hull with a heavy duty billet aluminum bar and stronger, larger, stainless hardware.
The kit is designed to prevent the inserts from pulling through the hull at high speed when using aftermarket intake grates. This GREATLY increases the SAFETY FACTOR when running high speed. Also a good replacement for those with stripped or broken bolts.

ISLAND RACING
HEAVY DUTY BRACKET KIT GPR PUMP SHOE
IR-HDBK-GPR-PS $59.95

Our HEAVY DUTY PUMP SHOE BRACKETS are constructed from billet aluminum bar and are the finest barckets available on the market. Our kit eliminates the factory installed inserts which commonly spin and are prone to pulling through the hull causing major hull damage and possible personal injury. Marine grade Stainless Steel hardware included.

ISLAND RACING
HEAVY DUTY BRACKET KIT GPR RIDEPLATE
IR-HDBK-GPR-RP $59.95

Our HEAVY DUTY RIDEPLATE BRACKETS are constructed from billet aluminum bar and are the finest barckets available on the market. Our kit eliminates the factory installed inserts which commonly spin and are prone to pulling through the hull causing major hull damage and possible personal injury. Marine grade Stainless Steel hardware included.

ISLAND RACING
HEAVY DUTY TUNNEL HOSE KIT
IR-HDTHK-GPR $14.95

ISLAND RACING
HOLESHOT KIT
IR-HSK-P $169.95 Pro Valve
IR-HSK-S $159.95 Standard Valve

ADD 5 SKI LENGHTS INSTANTLY
This kit will significantly improve bottom end acceleration without sacrificing top end speed. A 5+ ski length difference in holeshot can easilly be achieved over stock. A must for grudge racers, wavejumpers, and closed course racers utilizing the stock exhaust system. WARNING: THIS KIT PRODUCES ARM RIPPING ACCELERATION!

PRO VALVE SHOWN
HOLESHOT KIT OPTIONS
STEALTH MOD KIT
IR-SMK $14.95

This kit replaces the water bypass fitting included in the Holeshot Kit with a "Y" fitting. Reroutes exit water to stock location on transom plate for that "stealth" look. Noone will see an additional water fitting on upper hull.
ISLAND RACING
MARINE LIQUID PUMP GREASE
IR-MLPG $13.95
8oz

We are often asked what the BEST grease to use in Yamaha pumps is. The answer is our MARINE LIQUID PUMP GREASE.Our grease is composed of MARINE rated lubricants and is blended specifically for use in Yamaha jet pumps. Regular grease is too thick and once "flung" off the bearings will lead to failure in short time. Our  Marine Liquid Pump Gease will actually flow to the bearings offering unequaled PERFORMANCE and PROTECTION. Recommended for ALL Yamaha jet pumps from stock to fully modified.

ISLAND RACING
MEGA FILTER FLAME ARRESTOR
IR-MFFA-66V $74.95

The ISLAND RACING MEGA FILTER adds POWER and PERFORMANCE by removing the restrictive stock flame arrestor and air silencer. Assembles on front of stock airbox.

ISLAND RACING
OIL INJECTION BLOCK OFF KIT
IR-OIBO-Y3 $16.95

Add reliability, engine protection, and performance by removing the oil injection system and converting to pre-mix. Premixing the fuel allows you to run higher quality oils that otherwise cannot pass through the oil injection system. Our plates are made from billet aluminum not stamped aluminum like others currently on the market and are anodized to prevent corrosion making our OIL INJECTION BLOCK OFF KITS  the highest quality, most complete kits available on the market.

ISLAND RACING
PRIMER KIT
IR-PKM-3 $49.95
GP1200R
IR-PKM-2 $41.95 GP800R

Eliminate hard starting and add performance by adding an ISLAND RACING PRIMER KIT. Eliminating the choke plates allows additional airflow through the carbs resulting in increased performance. Hard starting watercraft fires in seconds. Our PRIMER KIT contains only brass fuel fittings and the finest urethane primer line making our kit the highest quality kit available on the market from any company anywhere. Don't be fooled by other "cheaper" kits on the market that use plastic fittings and pvc tubing.

ISLAND RACING
QUICK CONNECT FLUSH KIT
IR-QCFK-SE-B $54.95
( Blue )
IR-QCFK-SE-R $54.95 ( Red )

Replace, relocate or simply upgrade your leaky, worn out OEM flush assembly to our HIGH QUALITY, user friendly Quick Connect Flush Kit. Just a simple push and the couplers snap together forming a solid LEAKPROOF connection.

ISLAND RACING
QUICK CONNECT FLUSH RELOCATION KIT
IR-QCFRK-B $64.95
Blue
IR-QCFRK-R $64.95 Red

Many watercraft come from the factory with the flush connection in a very inconvenient location. Not to mention they leak in a short period of time. 
Our Quick Connece Flush Relocation Kit RELOCATES and UPGRADES your leaky, worn out OEM flush assembly to a more user friendly location in the hull. Just a simple push and the couplers snap together forming a solid LEAKPROOF connection.

 
 
ISLAND RACING
SPARK PLUG INDEX WASHER KIT
IR-SPIWK $24.95

Our SPARK PLUG INDEX WASHER KIT allows you to “index” or align the direction of the electrode for more efficient combustion, HIGHER HORSEPOWER, and HIGHER PEAK RPM. Washers are made from 100% Stainless Steel and will not corrode in marine environments. Washers are reuseable.

ISLAND RACING
TUNNEL REINFORCEMENT KIT
IR-TRK-GPR $269.95

The ISLAND RACING TUNNEL REINFORCEMENT KIT contains the COCO Tunnel Reinforcement Skin, Island Racing Heavy Duty Bracket Kit, Marine Tex epoxy, and stainless steel hardware. 


ISLAND RACING HD BRACKET KIT $59.95
COCO TUNNEL REINFORCEMENT SKIN $179.95

ISLAND RACING
VF3 REED VALVE SYSTEM
$629.95
$64.95 Replacement Reeds ( per cage )

ADD UP TO 120+ RPM INSTANTLY
DO YOU WANT THE FASTEST, HARDEST ACCELERATING GP1200R AROUND? THESE REEDS ARE A MUST! GAINS UPWARDS OF 100 RPM CAN BE SEEN WITH THIS REED CAGE KIT. SOME HAVE REPORTED 130+ RPM GAINS AND OVER 2 MPH!!! THE 16 PETAL DESIGN PRACTICALLY DOUBLES THE AIR DELIVERY OVER THE STOCK REED SYSTEM. LONGER STAINLESS STEEL BOLTS REQUIRED INCLUDED IN KIT

ISLAND RACING
VF3 REED VALVE SYSTEM GP800R
$469.95
Kit
$64.95 Replacement Reeds ( per cage )

ADD UP TO 120+ RPM INSTANTLY
DO YOU WANT THE FASTEST, HARDEST ACCELERATING GP800R AROUND? THESE REEDS ARE A MUST! GAINS UPWARDS OF 100 RPM CAN BE SEEN WITH THIS REED CAGE KIT. SOME HAVE REPORTED 130+ RPM GAINS AND OVER 2 MPH!!! THE 16 PETAL DESIGN PRACTICALLY DOUBLES THE AIR DELIVERY OVER THE STOCK REED SYSTEM. LONGER STAINLESS STEEL BOLTS REQUIRED INCLUDED IN KIT

ISLAND RACING
COMETIC AFM GASKET KIT
IR-CGKVF3-3 $41.95
IR-CGKVF3-2 $27.95

Replace the paper style gaskets supplied with the ISLAND RACING VF3 kit with Cometic AFM type gaskets. AFM is a chemically blown, compounded nitrile synthetic rubber, bonded to an aluminum core with temperature resistance of over 2500* F.

HIGH SPEED T-HANDLE ADJUSTER - GP800R
SA-100 $13.50


HIGH SPEED T-HANDLE ADJUSTER - GP1200R
SA-300 $13.50

LOW SPEED T-HANDLE ADJUSTER - GP1200R
SA-200 $13.50

KLOTZ R50
KL-104 $16.08
Quart
KL-105
$59.76 Gallon

R50 Racing TechniPlate
Synthetic lubricant developed exclusively for use in Hi-RPM racing engines. TechniPlate R™ racing lubricity system protects engines from extreme heat and virtually eliminates engine wear. R50 film strength is comparable to castor oil with the benefits of Clean Burn technology. Premix Only.
 

KLOTZ SKICRAFT
KL-306 $14.28
Quart
KL-307 $50.26 Gallon

SKICRAFT TC-W3 TechniPlate
Pure synthetic lubricant. Extremely high load carrying capacity for reduced engine wear. Clean Burn™ No-Smoke Technology eliminates carbon and residue build-up. Meets and exceeds TC-W3, TC-W2, TC-W and API TC low ash specifications for certified warranty compliance.

KWIK TEK BUNGEE DOCK LINE
AHDL4 $10.95 4' stretches to 5.5'

KWIK TEK DOCK LINES
PWCD-2 $12.95
 
These dock lines are incredibly versatile and functional. A giant snap hook is spliced to one end for attaching to ski eyes, cleats, bow eyes and mooring rings. There's a 10" loop on the other end for attaching to dock cleats. Finished length is 7 ft. Great for PWC's and jet boats. 2 per package.

KWIK TEK PWC TOW STRAP
TS-15 $12.95
  • Stows handily; perfect to have around in emergencies
  • Yellow floating strap measures 15' with a 10" loop at each end, and includes a detachable heavy-duty carabiner
  • Comes with a mesh bag with drawstring and cord lock
  • 1,500-lb. tensile strength

LEO'S 2 DEGREE PUMP WEDGE
LEO-PW2 $199.95

Instantly add up to 1.5 MPH to your GPR.

MAXIMA SUPER M INJECTOR
28901 $14.95
Liter
289128 $49.95 Gallon

Super-M Injector is the first truly high performance racing oil designed to be used in oil injection systems. The legendary Super-M formula has been adjusted to allow the personal watercraft owner to leave his oil injection operational and still enjoy the benefits of a racing quality oil without going to a pre-mix. Super-M Injector Oil is blended with the latest, most advanced additive systems that yield engine protection and cleanliness that has to be experienced to be believed. Super-M Injector Oil uses the same additive system, for extreme pressure lubrication and anti-scuff, that the original championship Super-M utilizes. Super-M Injector can also be used as a premix at manufacturer's recommended gas:oil ratios.

MAXIMA PREMIUM 2
21901 $14.95
Liter
219128 $49.95 Gallon

Premium 2 is a clean burning synthetic blend of high performance polyolester, polybutene and petroleum base stocks along with ashless additives that provide outstanding anti-wear/anti-scuff protection and virtually no carbon deposits. NMMA TC-W3 Premium 2’s environmentally friendly formula is extremely “low smoke” and will keep rings and power valves free and operating at peak performance. Exceeds API TC, ISO-E-GD and JASO-FC standards and all OEM requirements.

 
MAXIMA MARINE PRO
25901 $11.95
Liter
259128 $42.99 Gallon

Marine Pro is a petroleum based 2-cycle oil specifically formulated for watercraft and outboard motor service. The ashless 2-cycle lubricant is NMMA certified for TC-W3 performance and exceeds API-TC-W3 standards. Marine Pro is an outstanding lubricant with enhanced rust & corrosion protection, anti-scuff/anti-wear protection and special additives to prevent ring sticking and carbon formation.

 
MAXIMA MPPL PENETRANT LUBRICANT
73920 $8.95

Maxima Multi Purpose Penetrant Lube is a superior, all purpose penetrating lube that displaces water and provides excellent rust and corrosion protection. It is useful wherever a penetrating lubricant is required. Maxima MPPL forms a protective film on metal and will not harm plastic or painted surfaces. Excellent fogging oil or starting fluid for 2-cycle or 4-cycle engines.

MES HIGH TORQUE STARTER
S1099MHT $229.95

MIKUNI CARBURETOR REBUILD KIT
MK-BN44I-YAM $54.95 Yamaha I Body

   
MONKEY GRIP MOTOR MOUNT
57-1173 $50.95


Desined specifically for heavy duty jetboat and watercraft applications. Monkey Grip Motor Mounts are designed to be stronger than OEM mounts, yet able to dampen and isolate vibration far better than performance mounts currently available. This combination of durability and performance make monkey grip the right choice.

NGK SPARK PLUG
BR8ES-11 $2.95

   
NUJET IMPELLER
YM-C60 $177.95
Stock / Limited 1200
YM-C65 $177.95
Limited / Mod 1200

PARTS UNLIMITED BATTERY
HEAVY DUTY
RCB16CL-B $56.95
( Yuasa Equivelent YB16CL-B )

  • Powerful starting power at a great price
  • Build to the same exacting specifications and quality-control standards as top brand-name Japanese batteries
  • Rugged and provide more power over standard conventional batteries
  • Includes anti-sulfation chemical formulated to reduce sulfate crystal buildup on the battery plates
  • Heavy-Duty batteries are shipped dry (Acid not included)

PARTS UNLIMITED BATTERY
AGM MAINTENANCE FREE
2113-0043 $93.95 ( Yuasa Equivalent YB16CL-B )

  • Parts Unlimited is proud to offer a premium-quality, maintenance-free battery at a great low price
  • Special absorbed-glass mat batteries eliminate water loss, permitting the battery to be permanently sealed once it is filled with acid
  • Acid Pak included
  • Holds charge three times longer than conventional batteries
  • ( UPS Ground Shipping only )

PARTS UNLIMITED PRIMER KIT
PD820007 $28.95
Mikuni Dual Carb ( GP800R )
PD820009 $30.95 Mikuni Triple Carb ( GP1200R )
 

POWER MAX MAINTENANCE-FREE BATTERY
GTX16CL-BS $94.95
  • High performance AGM. Sealed type, maintenance free
  • Completely sealed black case can be mounted in almost any position
  • Advanced technology allows very high power discharge
  • Accepts a high rate of recharge without damage to the battery
  • Can be recharged over 90% in less than one hour on a regulated charger
  • Battery MUST BE CHARGED in the same manner as any lead acid battery
  • When not in service, battery should be charged once a month

PRO-TEC STEERING NOZZLE
11-9452 $109.95
+50mm Black
11-9453 $109.95 +50mm Silver
11-9444 $104.95 +20mm Silver

PRO-X PISTON KIT
7170A $139.95
7170B $139.95
7170C $139.95

The Pro-X pistons are cast according to original specifications with performance upgrades to enhance reliability. The aluminum alloy used in the manufacturing of Pro-X pistons maintains or exceeds factory specifications. The eutectic alloy contains a substantial silicone content for maximum strength and performance. Pro-X pistons are lightweight and precision ground on CNC machinery. All pistons are available in standard sizes along with fractional increases in size if boring is necessary. Pro-X, the smart solution for engine upgrades and repairs.

PROK FLAME ARRESTOR KIT
PROK-FAK-66V $199.95
GP1200R
PROK-FAK-66E $134.95 GP800R

PROK MULTI FIT FLAME ARRESTOR
006-585 $42.95
each

The versatility, features and benefits of the Multi-Fit revolutionized the flame arrestor industry and is the choice of top teams and riders around the world. From the quality of its non-absorbing stainless element, to the internal support and large parabolic cone, its performance is cutting edge. The rubber base of the Multi-Fit clamps around any conventional carburetor adapter flange. Weighing in at only 148g's, it is the lightest in the world but its quality and construction put it with our Quick-Fit as the strongest in the world able to hold over 300lbs of weight.

PSYKHO STARTER
2110-0293 $109.95

All Brand New High Quality Marine Starter
Meets or Exceeds OEM Specifications

R&D AQUAVEIN INTAKE GRATE
112-00800
$169.95  GP800R

The R&D Aquavein Intake Grate will load your GPR pump with more water adding extra pump efficiency and traction! In rough water conditions average speed increases with the added hook up. Adds 1 MPH top end speed when used on GP1200R.

R&D AQUAVEIN INTAKE GRATE
112-12002
$169.95  GP1200R

The R&D Aquavein Intake Grate will load your GPR pump with more water adding extra pump efficiency and traction! In rough water conditions average speed increases with the added hook up.

R&D D-PLATE
332-12000
$83.95

The R&D D-Plate takes the place of the stock Catalytic Converter and delivers the best overall low, mid, peek and overall horsepower. The benefits include reducing engine compartment temperatures created by the catalytic converter and reliability of the complete stock exhaust assembly.

ISLAND RACING
D-PLATE GASKET KIT
IR-DPGK $59.95

Yamaha Service Manual recommends installing new gaskets with pipe disassembly as gaskets are "non reuseable". We put the necessary required gaskets together in one convenient kit. 

R&D HYDRO FORCE STEERING NOZZLE
162-12000
$124.95

R&D's new Hydro Force Steering Nozzle for the GPR is a direct replacement nozzle. The adjustable pivot point position improves the turning radius allowing you to carve tighter turns with a more positive feel. Improved performance through speed, acceleration and handling.

R&D HYDRO FORCE STEERING NOZZLE
162-14000
$135.13

R&D's Hydro Force Steering Nozzle for the GPR is a direct replacement nozzle. The adjustable pivot point position improves the turning radius allowing you to carve tighter turns with a more positive feel. Improved performance through speed, acceleration and handling. STOCK LENGTH

R&D PUMP SEAL KIT
162-00000
$73.45

R&D's Pump Seal Kit for the GP1200R stuffs up all those unwanted cavities in the pump shoe that aid in producing cavitation. Reducing cavitation equals greater performance.


R&D REED STUFFERS
272-12000
$52.95

The R&D Reed Stuffer is designed to drop into the OEM reed valve and create a blue printed match between the OEM manifold and reed valve. Stuffing up the reed eliminates air turbulence, creates maximum airflow, improved velocity to the intake ports, and allows the engine to pull more fuel through bottom and mid rpm range. Producing crisp throttle response and increased bottom and mid power.

R&D RIDEPLATE
122-12001
$199.95

The R&D GP1200R Ride Plate is up-dated for 2003. R&D modified their production tooling to incorporate improvements found through hundreds of gallons of recreational testing and feedback from their racing programs during the 2001 and 2002 race seasons.
The plate mounting surface has been raised and re-angled, producing quicker and more stable planning from 0-30mph and smoother cruising at 50-60mph. There is also more positive straight line stability and better high speed cornering. They made some great improvements to their already successful design. This very ride plate design has been used for the past three years by almost all top IJSBA Factory Yamaha Race Teams and to date it is the only aftermarket ride plate to win the coveted Pro 1200 World Championship, 2 Indoor Pro 1200 World Championships, and dominate in the Offshore Championships for three consecutive years.
  • This is one fast ride plate!
  • Increases handling & top speed dramatically.
  • Installs easily.
  • Ball burnished finish gives a great polished finish look.

RIVA CAT TEMP SENSOR CHIP
RY115-20 $19.95

Riva's Cat Temp Sensor Chip is a must when removing the OEM catalytic converter on Yamaha 1200 & 1300 Powervalve engines. The circuit is designed to mimic the signal sent to the OEM CDI by the catalytic converter’s temperature probe preventing CDI flutters, warning devices sounding and engine shut downs due to cat removal. Can be used with stock or modified OEM CDI’s. Plugs directly into factory wiring harness.

RIVA D-PLATE
RY1819 $74.95

Riva's “D” plate is a low cost product that directly replaces the catalytic converter in the GP1200R, XL1200Ltd, XLT1200, and GP1300R. Installation increases top-end speed, reduces under-hood operating temperatures and allows the use of regular 2-stroke oils. This unit is a high quality stainless steel replica of the plate that is standard equipment on export model Yamaha watercraft without emission controls.

ISLAND RACING
D-PLATE GASKET KIT
IR-DPGK $59.95

Yamaha Service Manual recommends installing new gaskets with pipe disassembly as gaskets are "non reuseable". We put the necessary required gaskets together in one convenient kit.

RIVA FREE FLOW EXHAUST
RY1620
$44.95

Replaces the restrictive sound suppression system on GPR's. Provides reduced back-pressure that improves engines performance and reduces harmful detonation. Easy installation with noticeable results.
IJSBA Superstock legal. IJSBA Limited & Superstock legal.

RIVA IMPELLER HOUSING
RY33-155-YF $319.99

Riva's new heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams against your impeller. When well cared for, our stainless steel wear rings will provide years of trouble free use.

RIVA INTAKE GRATE
RY22420 $124.95

Designed for Stock to Stage III Craft
Reduced Cavitation
Improved Handling
Race-Bred Design
IJSBA Legal
RIVA PERFORMANCE PUMP CONE
RY3119
$89.95

Riva's Performance Pump Cone replaces the stock plastic pump cone on pump vein housings. The asymmetrical upsweep of the cone precisely matches the angle of the reduction nozzle significantly reducing cavitation and improving bottom end punch, midrange pull and overall performance. Constructed of cast aluminum and coated to prevent corrosion. Includes necessary hardware and instructions for easy installation.

RIVA PERFORMANCE TRIM TABS
RY2720-1 $179.95

RIVA PRO-SERIES ADJUSTABLE SPONSONS
RY2620-1
$239.95

Dramatically improves the handling of your GPR with its superior blade design and mounting angle. Includes a bulletproof mounting system that features a billet backing plate and three anchor points with billet inserts in sponson fins. Sponson is angled out at the bottom for better stability and more bite in corners. Sponson depth is adjustable to control the amount of influence they have on the craft. Easy installation requires no drilling.

RIVA RIDEPLATE
RY21013
$159.95

Designed to fit all GPR models
Improves Top Speed and Handling
Reduces Porposing
Provides Quicker Planing
Compatible with OEM Speedo Sender
IJSBA Race Legal
SLIPPERY WATERCRAFT COVER
4004-0174 $169.95

Heavy-duty, 600-denier poly/nylon construction with PVC backing to repel water
Non-scratch corrosion-free access zippers for wetsuit and vest storage
Reinforced openings for trailer pins; interior mesh pockets
Gas cap access flap on some applications
Full elastic shock-cord hem and tie-down loops for trouble-free trailering
Built for towing and storage
All covers black/gray

SOLAS BILLET IMPELLER CONE
SLA009 $14.95

Fits YF / YG Impellers

SOLAS CONCORD IMPELLER
YF-CD 11/14 $219.95
YF-CD 12/18 $219.95
YF-CD 13/19
$219.95
YF-CD 14/20 $219.95

Billet Aluminum Impeller Cone Included
SOLAS DRIVESHAFT HOLDER
WR007H $14.95

SOLAS IMPELLER TOOL
WR007 $11.95

SOLAS "SETBACK" CONCORD IMPELLER
YF-CD 11/14-SB $269.95
YF-CD 12/18-SB
$269.95
YF-CD 13/19-SB $269.95
YF-CD 14/20-SB $269.95

Relocates impeller closer to pump vane for reduced prop spin, reduced cavatation, and greater holeshot and acceleration over standard Concord impeller. A MUST for higher horsepower and modified watercraft.
Billet Aluminum Impeller Cone Included

WAVEEATER POWERVALVE KIT
WEPVK-3 $99.95
GP1200R
WEPVK-2 $59.95 GP800R

Prevents powervalve failures commonly associated with the stock powervalve actuator arm. Increases engine reliability.

WINDEROSA GASKET SETS
0934-0724 $152.58
Top End
PD811542 $206.65 Full Engine

Top-end set includes bases and heads, along with intake and exhaust gaskets (only those nearest the block).
Full engine gasket set includes bases, heads, intakes and crankshaft oil seals.

WISECO PISTON KIT
758M08000 $139.95
80mm/STD
758M08050 $139.95 80.5mm/.020 
758M08100 $139.95
81mm/.040
   
   
WSM BEARING HOUSING ASSEMBLY
003-400-01 $138.53

WSM COUPLER SHAFT
003-253 $200.18 2000-2001 GPR
003-255 $191.13 2002 GPR

WSM DRIVESHAFT
003-178 $211.75 2000-2001 GPR
003-181 $258.77 2002 GPR

WSM FUEL FILTER
006-541 $13.95

WSM JET PUMP REPAIR KIT
003-627 $35.34

WSM MOTOR MOUNT
011-126 $50.80 GP1200R

 
WSM MOTOR MOUNT
011-127 $50.80 GP800R

 
WSM PLATINUM SERIES PISTON KIT
010-829PK $81.83 Std
010-829-04PK $81.83 .25mm
010-829-05PK $81.83 .5mm
010-829-06PK $81.83 .75mm
010-829-07PK $81.83 1mm

WSM PLATINUM SERIES TOP-END REBUILD KIT
GP1200R
010-829-10P $422.95 Std
GP800R
010-828-10P $278.84 Std

 
WSM STARTER RELAY
004-124 $43.61 00-01 GPR
004-125 $43.61 02-05 GPR

 
WSM STEERING CABLE
002-051-02 $171.93

 
WSM THROTTLE CABLE
002-055-03 $60.67

 
YAMAHA COVER
MWV-CVRGP-CH-BL $204.95
Charcoal/Blue

 
YAMAHA DRAIN PLUG
EU0-62282-00-00 $6.49
( Plug )
EU0-62283-00-00 $3.49 ( O-Ring )

Replace your worn out drain plug or keep a spare on board.
O-Ring Not Included with Plug. ( Purchace seperately )

   
YUASA BATTERY
YB16CL-B $73.95
  • Only Yuasa has Yumicron, the most powerful lead-acid battery of its size that appears as original equipment on more and more watercraft
  • All Yumicron batteries are shipped dry ( Acid not included )

YUASA BATTERY
YTX20HL-BS-PW $119.95
  • HIGH PERFORMANCE AGM MAINTENANCE-FREE
  • This new generation of maintenance-free batteries delivers higher cranking amps for vehicles that require extra starting power
  • Additional cranking amps make these one of the most powerful batteries on the market
  • Acid Pak included ( Contintal USA Ground Shipping Only )

  
 
 
MISCELLANEOUS

 
DRIVE LINE COUPLER
DLC223 $39.95
00-02 Engine Side / 00-01 Shaft Side
DLC224 $39.95 02 Shaft Side

IMPELLER HOUSING W/ PLASTIC WEAR RING
JPH508 $209.95
REPLACEMENT WEAR RINGS
JPH508RR $34.95

Add performance and impeller life by installing an impeller housing with a replaceable plastic wear ring. Tighter clearances between the impeller and ring produces more thrust and reduces prop slip. Wear on the impeller is reduced because the plastic will wear before the outer edge of the impeller.