>  |
 |
RIVA RXP STAGE 1 KIT
RIVA Power Filter Kit
RIVA RXP Top-Loader Intake Grate
Solas Concord Impeller SRX-CD-14/19R
RIVA Pump Wedge
|
 |
| CLICK FOR LARGER VIEW |
|
|
RIVA RXP STAGE 2 KIT
RIVA Power Filter Kit
RIVA / Vortech Supercharger Impeller
RIVA Power Cooler Kit
RIVA Rear Exhaust Kit
RIVA RXP Top-Loader Intake Grate
Solas Concord Impeller SRX-CD-15/20R
RIVA Pump Wedge
RIVA Pro-Series Sponson Kit
RIVA O.P.A.S. Performance Block-off Kit
|
 |
| CLICK FOR LARGER VIEW |
|
|
RIVA RXP STAGE 3 KIT
RIVA Power Filter Kit
RIVA RXP Pro-Series Supercharger Housing & Impeller
RIVA RXP Power Cooler Kit w/Pro-Series Blow-off Valve
RIVA RXP Pro-Series Fuel Injector Kit
RIVA RXP Thermostat Kit
RIVA Rear Exhaust Kit
RIVA Pro-Series ECU
RIVA RXP Valve Spring Retainer Kit
RIVA RXP Heavy-duty Supercharger Clutch Washers
RIVA RXP Top-Loader Intake Grate
RIVA/Skat-Trak Swirl Impeller w/Billet Nose Cone SP-IMP-159-15/19R
RIVA Pump Wedge
RIVA RXP VTS Extension Rod
RXP Pro-Series Reduction Nozzle
RIVA Pro-Series Sponson Kit
RIVA O.P.A.S. Pro-Series Block-off Kit
|
 |
| CLICK FOR LARGER VIEW |
|
|
HYDRO-TURF MATS
HT89 $79.95
| |
HYDRO-TURF SEAT COVER
SEW89 $150.00
| |
K&N PERFORMANCE GOLD OIL FILTER
KN556 $12.95
K&N Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. K&N Powersports Oil Filters are ‘TUV’ product endorsed and ‘TUV’ factory production monitored. This means every K&N oil filter is equal to or will exceed all OEM specifications. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. K&N Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.
| |
R&D AQUAVEIN INTAKE GRATE
113-95001 $124.95
Bolt on the new RXP 215 Pro Series Aquavein Intake Grate and put that 215 horsepower to work! R&D’s exclusive dual patented technology that’s incorporated into the revolutionary Aquavein will tame the RXP 215 beast! Blow through low and high-speed turns with confidence and chew up rough water conditions with new found top speed averages. Quicker acceleration and straight-line stability are also increased. The RXP Aquavein Grate also has two pilot holes predrilled on the inside of the rear mounting flange, making the installation of the optional RXP Aquavein Girdle Kit a simple and easy task.
| |
R&D AUTO TRIM KIT
163-21502 $329.95
The R&D RXP 215 Auto Trim Kit was developed to override the OEM VTS System with a fully adjustable and fully automatic trim system! The R&D Auto Trim automatically drops a rider preferred adjustable 2-8 degrees. Drive from turn to turn never worrying whether the trim is in the best position for perfect turn negotiation! The R&D Auto Trim allows you to set the trim up your way to carve perfect turns every time! For long straight rides install the R&D VTS/Holeshot Driver Rod (Pt. # 163-21503), which works in conjunction with the R&D Auto Trim to electronically override the Auto Trim back to the OEM VTS Nozzle angle trim settings! The combination allows the best of both worlds for recreational and closed course riding!
| |
R&D CRANKCASE BREATHER KIT
203-00216 $30.95
The R&D Crankcase Breather Kit will add a high performance look to the RXP's engine compartment! The R&D Crankcase Breather Kit eliminates power-robbing crankcase fumes from the engines main air intake. Cleaner mass air equals more power!
| |
R&D EXHAUST MANIFOLD X-TENDER KIT
613-95004 $119.95
The R&D High Performance Exhaust Manifold Extender Adaptor Kit (X-TENDER) is a creative and unique product that was designed and developed while testing the R&D Superclutch and new R&D/Vortech high performance compressor wheels. The Sea-Doo supercharger and exhaust systems parts and “J” pipe are extremely difficult to get to and handle when they are extremely hot, and the exhaust systems “J” pipe that must be removed can be tricky on a cold engine. R&D needed to be able to remove and replace the supercharger in five minutes to be able to test products back to back in a timely manner, as well as the same day for accurate testing data. The R&D Exhaust X-Tender Kit allows the exhaust to be extended 1.5 inches which will move the water muffler back 1.5 inches creating enough room to be able to change out a supercharger (Hot) in 5 minutes. No more hassling with extremely hot exhaust pipes, water mufflers and V-band clamps! The X-TENDER kit installs easily using an additional V-band clamp. Install the R&D Exhaust X-TENDER kit in place and never hassle a supercharger change out again. Once installed and used you will wonder why the factory didn’t build it this way! The R&D X-TENDER is manufactured from the highest grade stainless steel exhaust material available. The R&D kit will install directly to all RXT/RXP/GTX supercharged model Sea-Doos using O.E.M. BRP hardware.
| |
R&D INTAKE GRATE GIRDLE KIT
123-10010 $74.95
The R&D RXP Aquavein Girdle Kit was designed and developed to add two extra 6mm bolts to the back end of either and R&D Aquavein or OEM grate for a much higher degree of security against pulling inserts out of the OEM PVC plastic pump shoe! The R&D Aquavein Girdle Kit installs easily and is a highly recommended accessory to either stock or R&D Aquavein Intake Grates! A must for competition use!
| |
R&D POWER PLENUM FILTER KIT
203-00215 $174.95
A hot rod should run and sound like a hot rod! The new R&D RXP Power Plenum Air Filter Kit will get the job done with definite noticeable increase in throttle response and acceleration, as well as increase RPM’s between 50 and 100! R&D Power Plenum Filter Kits have been dyno tested and race proven to add 3 to 5 horsepower on stock four stroke 1500 cc engines! High performance four stroke guru’s have dyno tested the R&D Power Plenum Air Filters to over 280 horsepower! The R&D RXP Power Plenum Filter Kit gives the RXP 215’s engine a high performance racing look, sound, and performance without sacrificing an ounce of reliability! Nothing outperforms the Power Plenum!
| |
R&D PRO SERIES SPONSON KIT
123-95100 $299.95
The R&D RXP 215 Pro Series Sponson Kit was designed and developed to deliver lots of handling performance with adjustability options, which allows you to setup your Sea-Doo “your way” with 2-position backing plate and 3-position sponson blade adjustability. The R&D Pro Series Sponson Kits have been extensively offshore, race track, 1 up recreational, and 2 up recreational tested to guarantee a comfortable setting for any riding style! The R&D Sponson Kit will deliver a much smoother and more predictable ride over O.E.M. sponsons. Low speed and high-speed turns are a breeze with new found control! There is also a higher end recreational/race setting with enough grip for the best of pro’s! Track tested with Nicholas Rius and Chris Fischetti! With plenty of adjustability, it’s the only sponson kit you will ever need!
| |
R&D PRO STEERING NOZZLE
163-21500 $139.95
THE R&D RXP 215 Pro Series Steering Nozzle was developed to replace the OEM steering nozzles oval and stepped inner design shape with a race proven high performance round Venturi design. Improved acceleration, cornering, and top speed performance! The new R&D RXP 215 Nozzle also incorporates a cast in boss for the R&D Auto Trim Kit Option.
| |
R&D PUMP WEDGE
143-95003 $189.95
The R&D 2.5 Degree Reduction Nozzle Wedge Kit for the new Sea-Doo RXP 215 has been designed, developed and tested extensively in all types of flat and rough water conditions to ensure that there would be no compromises any where in the Sea-Doo RXP 215’s handling performance! Extensive testing has led our development team to wedge the reduction nozzle up 2.5 degrees, which will inexpensively give the Sea-Doo RXP 215 better handling everywhere and provide a boost of up to 1 mph in top speed performance. In fact, a much smoother and more predictable ride will be noticed, along with the reduction of annoying bow spray! The billet aluminum CNC machined 2.5 degree reduction nozzle wedge kit was specifically designed to work with the OEM O.P.A.S. and Sea-Doo VTS systems. The R&D Sea-Doo RXP Pump Wedge Kit comes complete with the necessary adjustable billet VTS trim rod and billet steering cable extender! A smoother, more enjoyable, dryer, faster ride only from R&D!
| |
R&D SUPERCHARGER SURGE PROTECTOR KIT
613-95003 $189.95
The R&D Surge Protector Kit will significantly improve supercharger clutch and compressor wheel performance and reliability by eliminating compressor surge. Compressor surge is defined as the negative charge of pressure that causes turbulence in the supercharger that occurs during aggressive of off-throttle operations. When the throttle valve is abruptly closed at high rpms, the engine decelerates quickly down from 8,000 rpms, however the supercharger is compressing air (creating boost) as the supercharger has to decelerate from 42,000 rpms. This turbulence is the primary cause of undue stress on the supercharger clutch system and its components. The R&D surge protection kit utilizes an automotive vacuum assisted Bosch pressure blow off valve that automatically releases the unwanted intake pressure between the closed throttle valve and the supercharger. As soon as the throttle valve is opened, the blow off valve immediately closes and the compressor can supply its full boost potentials to the engine.
Manufactured from high-temperature silicone hose with an integrated molded riser for the blow off valve to function without hindering intake flow or velocity. The R&D kit Installs easily in place of the OEM rubber intake elbow joint. This kit is a very necessary and cost effective up-grade for all Sea-Doo supercharged watercraft. Kit comes completely assembled with silicone elbow, blow off valve, R&D B.O.V. filter, mounting hardware and instructions.
| |
RIVA GEN 2 SUPERCHARGER IMPELLER
RS1750-001B $449.95 RXP / RXT / GTX-SC
Presenting the ultimate (drop-in) performance supercharger impeller for the Sea•Doo 215hp engine! Working closely with Vortech Engineers, we developed the next generation high-performance replacement impeller that delivers 9lbs of boost @ 8,100rpm in RIVA Stage II applications. Produces more horsepower and torque throughout the RPM range resulting in excellent acceleration & top speed. Investment cast from an extremely strong, lightweight proprietary aluminum and CNC machined to ensure exact tolerances. All new blade design is optimized aerodynamically and precision balanced to deliver smooth operation. Installs easily into stock supercharger housing with no additional modifications required. Includes detailed installation instructions.
NOTE: It will be necessary to upgrade your stock pump impeller to a steeper pitch when using our GEN-2 Supercharger Impeller. Sea•Doo and RIVA both strongly recommend the use of premium octane (91+) pump fuel in your Supercharged watercraft.
|
|
RIVA HEAVY DUTY SUPERCHARGER CLUTCH WASHERS
RS1750-HDW-946 $119.95
Riva's Heavy Duty Supercharger Clutch Washers are direct replacements for the original ceramic clutch washers that are prone to fail on modified engines. Precision machined from tool grade steel and then coated with a special Titanium process to increase durability. Will not break up and damage engine at end of service life. NOTE: Must be used with 2006 style Sea•Doo supercharger shaft.
| |
RIVA INTAKE GRATE
RS22050 $124.95
Our top-loader intake grate for the RXP features a unique tapered wing design that eliminates prop spin and cavitation while delivering enhanced acceleration and top-speed. Deep side rails improve stability and handling. Durable black race coating protects from corrosion. Race Legal.
| |
RIVA O.P.A.S. PERFORMANCE BLOCK OFF KIT
RS29050-1 $94.95
Designed to cleanly and easily cover the openings left when O.P.A.S. is removed preventing water from entering the hull. Made from billet aluminum utilizing o-ring seals. Anodized to prevent corrosion. Installs easily with stock hardware.
NOTE: FOR COMPETITION USE ONLY.
| |
RIVA POWER FILTER KIT
RS13050-06 $229.95
Delivers greatly improved acceleration and a 1~2 mph (150~200 rpm) top speed increase by replacing the restrictive stock intake system. The Power Filter® feeds your supercharger with a steady diet of cool air via a large 3” diameter intake duct and oversized K&N filter element. Ducting is precision formed from a race proven composite that will not conduct heat to incoming air. Installs securely via a silicone coupler and sturdy bracket. Includes pre-filter element.
NOTE: It will be necessary to upgrade your stock pump impeller to a steeper pitch when using our Power Filter Kit. Sea•Doo and RIVA both strongly recommend the use of premium octane (91+) pump fuel in your Supercharged watercraft.
| |
RIVA PRO SERIES WATERBOX
RS16082 $359.95
Riva's Pro-Series Sea-Doo Water Boxes deliver increased horsepower and performance by reducing exhaust restriction and back pressure. Developed on a flow bench, our water boxes feature radiused exhaust tubes and end caps for optimum exhaust flow. Innovative short design allows easy servicing of supercharger without removal of exhaust system. High strength aluminum construction & precision welds will survive backfires & overheating. Powder coated to prevent corrosion. Includes detailed installation instructions.
|
|
RIVA PUMP WEDGE
RS23050 $114.95
Riva's Pump Wedge will substantially improve the handling characteristics and increase the top-speed of your craft 1-2 mph. The precision-machined 2 degree wedge trims up your pump nozzle raising the bow of your craft for less drag and more control. Features a unique double-sided lip to retain silicone sealant and prevent cavitation. Constructed of aircraft grade anodized aluminum. Comes with steering cable extender and spacer with bolt.
| |
RIVA REAR EXHAUST KIT
RS15050-1 $239.95
Riva's Rear Exhaust Kit allows removal of restrictive sound suppression system located between waterbox and hull exit. Improves engine performance by reducing back pressure and restriction. Strategically placed fitting injects water just before exhaust exit to suppress sound level. Includes custom molded exhaust tube, billet through-hull exhaust outlet and OE exhaust outlet block-off along with all necessary mounting hardware & installation instructions.
Removal of O.P.A.S. and installation of RIVA Performance O.P.A.S. Block-off Kit (part# RS29050-1) is necessary to accomodate installation of RIVA Rear Exhaust Kit.
| |
RIVA PRO SERIES REDUCTION NOZZLE
RS23050-N $329.95
Riva's Pro-Series Reduction Nozzle is ideal for tuning your Sea•Doo pump combination to maximize performance. Nozzle exit diameter can be easily changed via interchangeable ring system. Looking for more RPM or acceleration power? Insert a larger diameter ring. Want more top speed? Install a smaller diameter ring. Nozzle includes three precision-machined stainless steel rings. Additional ring sizes available.
| |
RIVA PRO SERIES SPONSON KIT
RS26050 $289.95
Riva's race proven Pro-Series Sponsons will dramatically improve the handling of your craft with their superior blade & backing plate design. Includes a bulletproof mounting system that features a solid backing plate and five anchor points with billet inserts in sponson fins. Sponson depth is adjustable to control the amount of influence they have on the craft. Easy installation uses original mounting studs. Includes necessary hardware and installation instructions.
| |
|
RIVA STAINLESS STEEL REPLACEMENT WEAR RING
RS33-159-SRX $179.95
Riva's heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Replaces original plastic unit on RXP, RXT and GTC-SC Ltd. models with easy press in installation. Durable stainless steel resists debris damage and saltwater corrosion. Provides increased durability and performance due to precision machined clearance between wear ring and impeller.
| |
RIVA THROTTLE CONVERSION KIT
RS2455 $219.95
Quickly and easily transform your Sea•Doo thumb throttle into a more natural finger throttle with our Throttle Conversion Kit. Aluminum extensions insert directly into bar ends adding 1-3/4” to each side providing more turning leverage and a more natural riding position. Molded steering pad end cap mates to finger throttle for a clean factory look. No modifications to existing handlebars necessary and minimal downtime.
Available for RXP, RXT, GTX 4-TEC and GTI 4-stroke models with stock and aftermarket grips.
Includes drill bit, tap, stainless steel bolt (to secure throttle trigger to handlebars) and complete installation instructions.
| |
SOLAS IMPELLER
SRX-CD 13/18 $269.95
SRX-CD 14/19 $269.95
SRX-CD 15/21 $269.95
| |
|
|
 |
 |
|
